SAE 80W-140 Synthetic Gear Oil, API GL-5
U1P-Gear SAE 80W-140 Synthetic Gear Oil. API GL-5 is formulatedwith synthetic base oils and specialty performance additives to provide improved high-temperature thermal and oxidative stability in a wide range of operating conditions. Specialty anti-scuffing additives and friction modifiers provide advanced protection and lubricity in extreme pressure conditions. Additionally, U1P-Gear SAE 80W-140 Synthetic Gear Oil, API GL-5 is highly shear stable while also resisting rust, oxidation, foaming, and varnish.
U1P-Gear SAE 80W-140 Synthetic Gear Oil, API GL-5 is designed for use in all seasons and exceed the year-around, all-weather performance viscosity requirements of SAE J306 as well as the rigorous performance requirements of API GL-5 and MT-1. API Category GL-5 designates the type of service characteristic of gears, particularly hypoids in automotive axles under high-speed and/or low-speed, high-torque conditions.
Lubricants meeting API MT-1 provide protection against the combination of thermal degradation, component wear, and oil seal deterioration which is not provided by lubricants meeting only the requirements of API GL-5.
This oil also meet or exceed the performance requirements of the following industry and OEM specifications: API GL-5, API MT-1, Mack GO-J Plus (75W-90), Mack GO-J (75W-140), SAE J2360, and Meritor O76-E.
Ultra1Plus™ SAE 80W-140 Synthetic Gear Oil, API GL-5 highlights:
- Protection from rust and corrosion.
- Exceptional shear stability.
- Good foam resistance.
- Designed to extend seal life and reduce leaks.
- Increases vehicle uptime.
Ultra1Plus™ can export products worldwide. Products available for larger purchases, truckloads and pallets, please CONTACT US
WHAT DOES IT MEAN WHEN A PRODUCT IS "UNAVAILABLE"?
Safety Data Sheets & Product Information:
ENGLISH:
SPANISH:
WARNING: California Proposition 65 www.p65warnings.ca.gov
Typical Properties: | |
SAE J306 Viscosity Grade | 80W-140 |
Appearance | Yellow Transparent Liquid |
Viscosity @ 40°C, cSt, ASTM D445 | 230.25 |
Viscosity @ 100°C, cSt, ASTM D445 | 26.0 |
Viscosity Index, ASTM D2270 | 145 |
Flash Point, °C (°F), ASTM D92 | 210 (410) |
Pour Point, °C (°F), ASTM D97 | -36 (-32.8) |
Exceeds Performance Requirements: |
API GL-5, MT-1 |
SAE J2360 |
Mack GO-J (75W-140, 80W-140) |
Mack GO-J Plus (75W-90) |
Meritor O76-E |
Handling:
- Avoid extremes of temperature.
- Product in cardboard cartons must be stored under cover and away from damp conditions.
- Drums (barrels) should be stored under cover if possible.
- If drums must be stored outside, then lay them on their side to prevent water collecting around the bungs.
Nota: SAE 80W-140 Synthetic Gear Oil. API GL-5 is available in bulk quantities at substantial savings. Use of bulk oil products is environmentally proactive.
Reviews
-
80w140 full synthetic gear oil
Oil is as advertised, great customer service